This BIOS upgrade fixes the HW conflict between HD and Floppy
and 32 bits disk access.

Do the following :

- Turn on your computer
- Enter BIOS and write down your HD setup, cylinder etc.
- Do a clean boot (by holding down F5)
- Start AWDFLASH.EXE
- Follow the instructions , BUT SAVE YOUR OLD BIOS!!!!
- If the program stops at address 1ff0, turn your machine off and then on.
  The BIOS is upgraded now anyway.
- Try to enter BIOS, if you have a password set now, do the following :
  Turn off your PC, Connect the dip  switch W6 which is to the left the 8 
  small switches on your Motherboard, then disconnect it again. The password
  is now removed.
- Turn on your machine again, enter BIOS setup and write the HD setup back.

If you get a HD trouble like i did, try to auto-detect your HD or something
and it should come up with the right info about your HD when you BOOT.

If something dont work as it should , re-install your old BIOS which you saved.